BOSCH Dual Cone HQ Ceiling Speaker
Bosch range of loudspeakers offer a selection of units to meet most public address system requirements. And as a result of long and wide-ranging experience in all aspects of sound reinforcement, the unrivalled quality of these products can be guaranteed. An economic flushing-mounting ceiling loudspeaker is available for general purpose applications. This full range loudspeaker is suitable for both speech and music reproduction in shops, department stores, schools, offices, sports halls, hotels and restaurants. The speaker assembly consists of a single-piece, 6W dual cone loudspeaker and frame, with a 100V matching transformer mounted on the back. A circular metal grille is an integrated part of the front. The appearance and neutral white colour has been selected to be unobtrusive in virtually all interiors.
Functions Power setting Three lead wires are provided on the matching transformer (Primary) to allow selection of nominal full-power, halfpower or quarter-power radiation.
Mounting The assembly can be simply and quickly installed into a hole in the ceiling cavity and secured by two integral spring-loaded ceiling locking clamps. A circular template for marking a 165 mm diameter hole is included with the loudspeaker.
Safety aspects In common with all Bosch products, care is taken to meet high safety standards. This enclosure complies with the relevant safety and installation regulations of EN 60065.
Technical Specifications
Electrical LHM 0606/10 Max. power 9 W Rated power (PHC) 6 W (6-3-1.5 W) Sound pressure level at 6W/1W 92 dB/ 84 dB (SPL) (at 1kHz, 1 m) Effective frequency range (-10 dB) 80 Hz to 18 kHz Opening angle 175° / 55° (at 1 kHz/4 kHz, -6 dB) Rated voltage 100 V Rated impedance 1667 ohm Speaker size 6" Ambient temperature range -25° to +55°C Safety acc. to EN 60065 Dimensions (dia x max. depth) 199 x 70.5 mm Mounting cut-out dia. 165 mm Colour White (RAL 9010) Weight 620 g LBC 3080/01 Dimensions (dia x max. depth) 147 x 87 mm Certified B15 acc. to DIN 4102 Colour White (RAL 9010) Weight 360 g