Description
Fully featured PA amplifier with 2 independent stereo zone outputs and mixer section for 2 microphones and a stereo audio source. An inbuilt media player section offers playback of mp3 audio tracks from USB drive or SD card and also has a Bluetooth receiver and FM radio tuner. A rotary switch for each output zone selects the stereo playback audio from a choice of 2 rear stereo inputs, a front 3.5mm stereo input or the built-in media player. Mic inputs 1 and 2 are live to both output zones at all times. 2 pairs of speaker connections on the rear panel are via 4mm binding posts, which can drive up to 2 x 8 Ohm speakers on each of the 4 channels to deliver up to 4 x 200W. Designed to offer installers a comprehensive dual zone PA for bars, restaurants and function rooms.
- Independent stereo playback to 2 separate zones
- Media player with USB/SD playback
- FM radio tuner with external aerial connection
- Bluetooth receiver
- Power supply230Vac, 50Hz (IEC)
- FuseF5A, 250V
- Output power rms @ 4 Ohms4 x 200W
- Output power rms @ 8 Ohms4 x 100W
- Amplifier : construction Class D
- Frequency response20Hz – 20kHz ±0.5dB
- Microphone inputs2 x 6.3mm jack (mono)
- Line inputs Line 1: L+R (6.3mm jack/RCA), Line 2: L+R (RCA)
- Input sensitivity : line0.775Vrms
- Auxiliary input3.5mm stereo jack
- Input sensitivity : aux0.480Vrms
- Input impedance20k Ohms (balanced), 10k Ohms (unbalanced)
- Audio source USB/SD mp3 playback, FM tuner, BT receiver
- Bluetooth version2.3
- Input controls Aux, Media, Line1, Line2, Mic1, Mic2, Talkover
- Line output4 x RCA
- Speaker outputs4mm binding posts (4 channels)
- Antenna connection type (FM tuner)
- Output controls2 x source select, 2 x Bass, 2 xTreble, Ch1, Ch2, Ch3, Ch4
- Dynamic range92dB
- THD +N<0.1%
- Protection Thermal, over-current, over-voltage, short-circuit
- Dimensions482 x 240 x 88mm
- Weight5.98kg
General specifications
Output power 1kHz (THD N=1%: 3Ω) 30W x 2 (20ms Burst)
1kHz (THD N=1%: 4Ω) 30W x 2 (20ms Burst)
1kHz (THD N=1%: 8Ω) –
High impedance: 100V line 60W x 1
High impedance: 70V line 60W x 1
Total harmonic distortion ≤ 0.1% (Stereo in to Speaker out @1kHz, Half power, 3Ω/4Ω), ≤ 0.2% (Stereo in to Speaker out @1kHz, Half power, 70V/100V)
Frequency response 0dB, -2.5dB, 1.0dB (Stereo in to Line out, 20Hz to 20kHz), 0dB, -3.0dB, 1.0dB (Stereo in to Speaker out, 50Hz to 20kHz, 1W, 3Ω/4Ω), 0dB, -3.0dB, 1.0dB (Stereo in to Speaker out, 90Hz to 20kHz, 1W, 70V/100V)
Crosstalk ≤ -70dB (Stereo in to other Stereo in)
I/O Connectors Mic/Line Input –
Line Input –
Speaker Output Barrier strip x 2 pairs
Line Out Stereo RCA pin (unbalanced)
Control ports RJ-45 (for DCP1V4S)
Mic Input MIC IN 1: XLR combo jack (balanced), MIC IN 2: 3.5mm Euroblock (3-pin, balanced)
Stereo Input ST IN 1: Stereo mini phone (3.5mm, unbalanced), ST IN 2 / ST IN 3: Stereo RCA pin (unbalanced)
Input Level Mic input: -76 dBu (Sensitivity), -66 dBu (Nominal), -22 dBu (Max before clip) / Line input: -10dBV (Sensitivity), -10dBV (Nominal), 10dBV (Max before clip)
Output Level -10dBV (LINE OUT, Nominal)
Protection circuit Load protection Power switch on/off: Mute the output*, Output voltage protection: Compress the output*, DC-fault: Power supply shutdown (*Restored automatically)
Amplifier protection Thermal: Limit the output* → Mute* → Shutdown, Over current: Mute the output*, Integrated power limit: Compress the output* (*Restored automatically)
Power supply protection Thermal: Power supply shutdown, Over voltage: Power supply shutdown, Over current: Power supply shutdown
Amplifier class Class D
Cooling Conventional cooling, bottom to up airflow
Power requirements 100V, 120V, 230V-240V; 50Hz/60Hz
Power consumption Music source equivalent 30W (1/8max. power, 3Ω, AC 100V, pink noise at all channels)
Dimensions W 215mm (8.5”) *1
H 54mm (2.1”) *1
D 288mm (11.4”) *1
Net weight 1.8kg (4.0lbs)
Accessories AC power cable, 3.5mm Euroblock plug (3-pin) x 1, Owner’s manual, Specification sheet
Options RKH1 (Rack-mount Accessory), DCP1V4S (Digital Control Panel)
Certificate –
Others Operating Temperature: 0°C to 40°C, Storage Temperature: -20°C to 60°C, Rack-mountable when ensuring sufficient ventilation above and below the unit
*1: MA2120 and PA2120: incl. knobs, rubber feet and rack-mounting ears / MA2030 and PA2030: incl. knobs and rubber feet
